Spindle pattern 5.

 

Sizes

ex 50 X 50 mm – 2” X 2”

par 35 X 35 mm 1 3/8”

Minimum suggested handrail base size: 42mm – 1 3/4″

Kno Hints.

Spindle block lengths may need adjusting to suit height of handrail on cut string stairs.

When choosing a handrail confirm the base is wide enough to allow for top block at angle still fits within the base through turns.

Downloads.

Our download section is at the bottom of the page with Zip folders for .3dm .igs and .dwg Should you want a different file format, we would suggest downloading RhinoCad trial version, this will allow you to open our .3dm file and save it in another format that may suit your software.

3D model – for visuals .3dm .igs

2D outline – for drawings .3dm .igs .dwg

Plate 1 (pdf) Print to show clients or pin to your wall.

Full size, Split print with alignment targets for A4 or letter printers. (pdf) paste to board, cut round and take to your wood turner.

Spindle 5 3D model for download.
Spindle 5 3D model for download.
Spindle Pattern 5 Shaded.
Spindle pattern 5 outline.
Spindle pattern 5 outline.
Spindle plate 1 shaded
Spindle plate 1. Print this for your wall.
Spindle 5 Split-print A4 or letter.
Spindle 5 Split-print A4 or letter.

Staircase turned spindle pattern 5. Downloads:-

Spindle pattern 5,    35 mm – 1 3/8″

 

3D model:-

Spindle-5-3D-igs.zip Membership Required: Full – Spindle-5-3D-3dm.zip Membership Required: Full

 

2D outline:-

Spindle-5-2D-igs.zip Membership Required: Basic or Full   –  Spindle-5-2D-3dm.zip Membership Required: Basic or Full – Spindle-5-outline-dwg.zip Membership Required: Basic or Full

 

PDF:-

Spindle-plate-1.pdf (102 downloads)

 

SplitPrint PDF:-

Spindle-5-A4-SplitPrint.pdf Membership Required: Basic or Full – Spindle-5-SpliPrint-Letter.pdf Membership Required: Basic or Full